BMW Werkz banner

1 - 3 of 3 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter #1
Tool needs:
BMW standard tool (INPA, EDIABAS and WinKFP)
A laptop running win XP mode

Instruction:
1) Well install BMW WinkFP

2) Connect BMW ICOM A2+B+C diagnostic system hardware with vehicle via OBD socket.
3) After well load software, run BMW WinKFP software on the desktop.
4) Select “F1 Comfort mode”


5) Select “F3 Update ZUSB”, then choose engine type “MDS43” by pull down the drop-down list on “ECU family” Tab. Press “Done” button.


6) Press “F3 Prog ZB-Update”, accept the windows prompt by clicking on “Yes”



The WinKFP software will display the detail vehicle information on the top of the program.Accept “The user info field can still be programmed 12 times. Program ECU?” notice by clicking “OK”.WinKFP now is updating the ECU, wait until it processes to 100%.



ECU update is completed, ZUSB-Update programming OK.


Exit BMW WinKFP software
 

·
Registered
Joined
·
16 Posts
Tool needs:
BMW standard tool (INPA, EDIABAS and WinKFP)
A laptop running win XP mode

Instruction:
1) Well install BMW WinkFP

2) Connect BMW ICOM A2+B+C diagnostic system hardware with vehicle via OBD socket.
3) After well load software, run BMW WinKFP software on the desktop.
4) Select “F1 Comfort mode”


5) Select “F3 Update ZUSB”, then choose engine type “MDS43” by pull down the drop-down list on “ECU family” Tab. Press “Done” button.


6) Press “F3 Prog ZB-Update”, accept the windows prompt by clicking on “Yes”



The WinKFP software will display the detail vehicle information on the top of the program.Accept “The user info field can still be programmed 12 times. Program ECU?” notice by clicking “OK”.WinKFP now is updating the ECU, wait until it processes to 100%.



ECU update is completed, ZUSB-Update programming OK.


Exit BMW WinKFP software
images are broken, link is dead
Cheap V2016.7 BMW ICOM Software HDD ISTA-D 3.55.31 ISTA-P 3.59.0.600 with Engineers Programming Wind
 
1 - 3 of 3 Posts
Top