BMW Werkz banner

BMW Z3 new wheels and suspension set up

4234 Views 4 Replies 3 Participants Last post by  pangster
Been busy over the past while upgrading the suspension and wheels on my car - so thought I'd share some pics.

Suspension overhaul included:
E-Tech front strut brace
FK Silverline Coilover Plus suspension
Camber adjustable top mounts (front)
BMW OEM M3 strut reinforcement plates (front)
BMW OEM shock mount gaskets (front)
Meyle Heavy Duty top mounts (rear)
BMW OEM shock reinforcement plates (rear)
BMW OEM shock mount gaskets (rear)
Full Powerflex polybush kit (front and rear)
New sway bar/drop links (front and rear)
TPI hubcentric 3mm wheel spacers (front)
TPI hubcentric 15mm wheel spacers (rear)

FK Silverline Plus Coilovers:

I decided to use the OEM M3 strut tower reinforcement plate along with the camber adjustable top mount and also invested in a new gasket:

These are Meyle HD items with the Z3 reinforcement plate and new gasket (exact same as the UUC kit):

E-TECH STRUT BRACE (already fitted):

The wheels I chose were Beyern Multi.

18" Beyern Multi wheels (staggered - 18x8.5 front (225/40/18) and 18x9.5 rear (255/35/18))

Overall very happy with them! :)
See less See more
1 - 1 of 5 Posts
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.