[uthayan]

Got 2004 530i. When I drive slowly on local street, getting the following message on i-Drive display " Control System Malfunction, Transmission Fault, Flat Tire Monitor" , and switch to limp mode. Once I restart, message disappear and work normal.
*** It doesn't happen on Highway drive*** Is it related to Vaccum ( may be air leak ?).
*** I am getting this for last 2 month, put 5k since it started. Any suggestion? - Thank You

 

[witeshark]

You're likely on the hunt for a faulty sensor.

 

[uthayan]

530 i Transmission Fault + FTM fault +ABS Fault

You're likely on the hunt for a faulty sensor.

Which sensor ? all 3 { Transmission + FTM + ABS }, do you have an idea of where they are located ?
Thank you

 

[marti5]

A full diagnostics will tell you which sensor or what has malfunctioned.

 

[uthayan]

2004 - 530i: Malfunction

A full diagnostics will tell you which sensor or what has malfunctioned.

Thank you and will update as what the BMW dealer says. Hope it is not a costly repair

 

[topshotta45]

control unit malfunction

Thank you and will update as what the BMW dealer says. Hope it is not a costly repair

were you able to find the problem?

 

[chriscmc]

You're likely on the hunt for a faulty sensor.

hi i hope someone can help me out heer i have a bmw 530de60 53 plate.
had car to garage and fault codes are p1891 what do i need to fix this. other code i got was p0701 transmission control system range performance. what can i do to have this fixed.
how much £££

 

[chriscmc]

any help gys . bmw 30d e60 53plate.
fault codes are p1891 high voltage what can i do to fix this.
second is p0701 transmission control system range performance what can be done for fix this and how many £££££