Siren Plug

[007ben]

I'm preparing to install my stellar alarm. but 1st I want to track all the connections that need to be made down. I cannot for the life of me find the alleged factory alarm plug under the hood.

94 325i.

could someone take pics of theirs so i know what the hell I'm looking for the directions come with crappy drawings that havent helped yet. if the plug cannot be found what are the colors of the wires I'm going to need to tap?

I'm wondering if this isn't something else the previous owner fucked up for me.

[007ben]

after googeling didn't help i yahooed. and go this

http://www.digest.net/bmw/archive/v8/msg05413.html

BTDT. On my '95 the hood switch cable was hard to find too. It's shoved
waaaay up behind the carrier that holds all the electronic modules. You'll
just have to reach up there and feel around for a loose connector.
If you have the full OBC, then the plug you are looking for is already
plugged into the OBC horn. That's what you are hearing when the alarm arms.
This is not obvious at all from the manual. You could just leave it like
that, but if you want the siren you'll have to transfer the plug from the
horn to the siren. The horn is accessible by removing the sheetmetal cover
which you see when you look straight down behind the passenger side headlight.

Good luck,

I do hav ethe OBC. and kept looking at a little metal sheet metal box a wire went to and wondered what the hell is in there.