| I got my front Bilstein SP suspension from a '92 318 and the struts were relatively new (still very good compression). Anyways, I'm wondering if my struts were for the 91/10 model E36's with the front strut mounted sway bars. I'm currently using a Dinan front sway (control arm mounted). However, too much understeer with the 20mm rear M3 sway bar. I'm hoping that my front strut can use the M3 front sway bar. Is this possible? And is this tab shown in the picture for the sway bar endlink?
Anyways, this was shot from the inside top portion of my wheels. Too lazy to get under the car.
Thanks!
Bry
__________________ <u>1994 M-Technic M42 Saloon - Trillium Chapter - 5130</u> Stock - 2866lbs Current - 2670lbs
<a href='http://www.geocities.com/mtechnik42' target='_blank'>- VIEW MY MODS AND PICS</a>
<a href='http://www.automobile-technik.com' target='_blank'>- PARTS FOR SALE</a>
--------------------------------------------------------------------------------
<img src=" http://www.maxbimmer.com/forums/atta...tc=1"> | 
