| Since I made the first post I contacted Cyberdyne's tech support. After being told several months ago that the gauge would work with the stock sender I was told today that it won't work in my application. My question now is can I take the stock speedo out of the original housing and run it without the other gauges. Here's another question can I take the two wires that are coming from the sender and send them directly to the pos. and neg. poles on the speedo? Will this trigger the speedo. I've got about $300 tied up in digital gauges and mounting panel so I'm trying to save as much of the work that I have already done as I can. | 
