Ok, i gutted out my car, basically took off trim and what not. I have the bently manual for my car so i used the wiring diagram to help me a bit. I used a multi meter to test the wires. The wire that is supposed to have power only when the ignition is turned to on, always has power for some reason, and the wire that is supposed to give a constant supply of power for the clock, does not produce any power at all, even with car on. Everything is properly pluged in, all fuses were checked. I even put the old wiring harness back on, and i even made sure all the wires going to the speedometer and what not are good to go. I think it might be a problem with a relay, but am not sure. Any other suggestions?