BMW Werkz banner

error code can't be clear!!!!

2K views 1 reply 2 participants last post by  marti5 
#1 ·
hi, i have a e39 528i an recently i bought from eBay PA Soft software and interface plugged on the car a got a couple of error. SRS error, Instrument cluster error but im not so worried about that. My only problem is this one:

DME,
code 14 intake air temperature sensor
and
code 68 tank-ventilation valve, electrical problem.

I order and change bot the sensor and valve but when i connect the PC again the code's r still there. I erase them and check....code appear again on the screen.

Anyone had any idea what or where the problem could be?

Thanks!
 
#2 ·
I would say its a problem with the software not communicating with the ECU, I had this with Carsoft, when I got another software disc it worked fine, my first disc came with the leads etc from eBay, but I think the seller acquired them from china.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top