BMW Werkz banner

E46- 1.9 single cam stalling issues

3K views 2 replies 3 participants last post by  Z4Enthusiast 
#1 ·
First post on here and unfortunatly its a problem post :(

I have a 1999 E46 1.9 single cam that has clocked up a few miles. I have repaired most of the problems with the car but this morning while taking the misses to work, My car decided to stall on a majorly busy road,outside her work :help

She stalled coming down from around 2000 Revs, steering gone and everything. I also noticed lights flashing on the dash and guages ( rev guage mainly ) going everywhere. I started her bk up for her to stall again straight away. left her for 10 secs ish, where she started again with a huge poof of smoke, after which she was fine on the return home....

if anyone can give me any kind of ideas....... :D

Thanks in advance. Chris
 
#2 ·
The hugh Puff of smoke was probably unburnt fuel, as for the stalling hard to say at this point.

Pointers: 1. fuel filter 2. MAF sensor 3.camshaft sensor.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top