| Hmm..OK first off...when diog read out it said that mem 1 bank one sensor was out..and mem 2 bank 2 sensor was out..I take it that the first three cylinders..three closest to fan....is the mem and bank of 1...other three..mem 2 bank 2...Is the bank refering to before and after the cat? k so I replaced the sensor over the first three cylinders...one that is right under motor..then tookst three and took it back to Auto zone....still said mem1 bank1..and mem2 bank2..sensor out..But It also gave me error P1188-Calibration Fault....and P0170 that says...The PCM has determined that during testing, the fuel compensation value for bank 1 exceeded the specified Rang..Does this mean the Bosch I installed in meme 1 bank 1 worked but it isnt the right one..or is it giving me this because I havnt changed mem 2 bank 2...?
__________________
Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm... | 
Linear Mode
