Have You Installed Tails, Lights Or Sides?

[Rooz]

Ok, if you have installed aftermarket corners, tails or sides, please read my following post:

http://www.bmw-forums.com/forum/index.php?...pic=30057&st=40

My corners and sides are suppose to come in the 27th, and my tails on the 31st, I could use some advice on how to install them, so please read my post and give me whatever advice you can...

[drz]

Not hard to do. Everything should fit right in. The job should take you under an hour to complete. Make sure you show us some pics once you get it all done.

[Rooz]

will do

[Furious]

rears are very easy,take off black covers (turn the dial) unhook harnesses, then remove the nuts from the screws. then you can pop them out. reverse to install.

[Rooz]

how aobut corners?

[VeLoCiTy318]

where did you buy your lights from?
I got my taillights off ebay and while they work and fit flawlessly, I had to get them programmed at the BMW dealership because the electronic mapping in the tallights did not match that of the car's. not a big deal but something to keep in mind

[illwasteyou]

Originally posted by Rooz@Jan 27 2005, 08:09 AM
how aobut corners?

[snapback]279695[/snapback]

stick your hand in behind the corner, pull out the bulb bit, move it out of the way, and then unclip the clip that you will notice. and then it slides out.

[Deloriant]

Corners are very easy as well. Take a screwdriver, and slide it down between your headlight and your corner light. You'll see a white color prong sticking out. Push it TOWARDS the corner light and slide it out. You just have to mess with it for a bit.

[spieluhr]

http://www.geocities.com/e36rulz/DIY.html

that is all...

[drz]

Man, that's some good info you have links to. Thanks!