BMW Werkz banner

Final Drive Torque Figures for 96 e36 328i m-tech coupe.

1K views 1 reply 2 participants last post by  David Mc 
#1 ·
I have just replaced the rear wheel bearings in my BMW but am unsure as to what Torque settings to use for tightening the 2 driveshafts up. they each have 6no e12 Torx bolts where they bolt to the final drive (diff) flanges. As it is an M-tech, with L.S.diff I was not prepared to use the specs in my manual which doesn't cover the M's.Would also like figure for outside driveshaft retaining nut if poss.
I would be very grateful for any help. Many thanks.Fred.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top