Brake Sensor Warning Light

[BenRaty]

My brake sensor warning light lit up a short while ago, so I promptly ordered new pads, as well as new sensors (and kicked myself for not giving my brakes a visual inspection more frequently).

I finished installing everything today. The car brakes well, and everything would be in order, but for one thing: the warning light is still lit.

My question, then, is rather simple. Do I need to perform some sort of reset to shut the thing off, or did I overlook something while replacing the pads and sensors? The rotors appear to be in excellent condition.

[thekid]

does this warning light also light for the speed sensor?

[Fadec40]

did you drive the car after the brake pad change? My light stayed on for a couple of minutes, then extinguished whenI started driving

[El Presidente]

check the connection. The wire is either severed, not fully connected, or is not seated properly.

[TECH]

Was it the round, red warning light? Or some other light?

[BenRaty]

It's the round red light with hash marks on either side located at the bottom of the instrument cluster (along with all of the other system lights). I've driven it around a while now, but it's still lit. I went so far as to take the wheels off again and re-connect the cables. They're in correctly. I'm beginning to suspect it's a problem further up the wiring; I tested continuity on the cables I purchased and they're good.