[B]Need help installing chip

[steve 92 325is]

I am trying to install a chip on my 92 325is I have the computer out and the cover off but I can't seem to get to the chip ghead I have a few pic any help is appreciated. My comuter end in 402

[Furious]

can you blow up the pic a little more, its hard to be exact.

[steve 92 325is]

Here is the side view I can look in the blak hole in the right side of the image and see the chip

[steve 92 325is]

Here is the top

[steve 92 325is]

Blown Up

[steve 92 325is]

One more side pic blown up

[El Presidente]

http://www.logun.org/dme.htm

hopefully that will help.

[steve 92 325is]

Logun is a '92 which is a little different

[El Presidente]

but not by that much. I can you not get the case off from the other side? thats where your chip is.

[steve 92 325is]

My main problem is getting the top board off in order to get to the chip on the bottom board I cannot get it to slide out It is very tight

[El Presidente]

how much force have you applied?

[steve 92 325is]

I have tried pulling pretty hard I just dont want to tear it up and have to buy a new one

[steve 92 325is]

bump

[Bengali86]

wrong side? my 93 325is was very simular to my e30 325 when I changed chips on both-

when you open the top ( or was it bottom) the place where the chip is should be easily seen, that looks like the back or underside of the circut board

[steve 92 325is]

teh 92 e36 has two boards as seen in the pics I am having trouble puuling the top board out in order to get to the chip


ANY ASSISTANCE WOULD BE APPRECIATED