| Another no start...With a Twist!
As i posted on another forum with little to no help. i'm in the process of an engine swap (I should be done) but i have run into a HUGE wall, Now before everyone starts yelling EWS at me i know it is not an EWS issue. I cant seem to get any of the THREE DME's i have to communicate with the car AT ALL there is power and ground out of the dme connector, and i have 2 413 red labels known working and 1 506 that dont seem to want to show a response but the original DME from the car a 282 from an M42 motor will communicate and show a check engine light. I have double and triple checked all of my grounds gone through all my fuses test light on all power and grounds to make sure they are responsive, changed out the engine harness thinking it was shot still NOTHING the 6 cyl dmes dont want to work with my car. now the only other anomoly i see is when ever i disconnect and reconnect my battery is my hazards come on and wont turn off till i press the button on and then off. Also pin #7 the green wire is cut and the car will crank it just doesnt want to fire.
Im at a stand still here honestly any help other than someone telling me its EWS would be a great thing. and if someone is willing to come help me work on this POS and think they can get it running i am willing to pay.
Thanks in advance
Paul | 
Linear Mode
