BMW Werkz banner

'95 325i, Supercharger question

1K views 5 replies 3 participants last post by  94BMW325i 
#1 ·
I've got myself a Vortech supercharger (w/Dinan frame plate) some while ago. I know, such question might sound a little bold, but how hard is it to install this thing on my car and what parts, beside Super itself, should I look for. Ill post some pics later tonight. I will do all this job by myself (exept chip of course) so any input from you fellows would be greatly welcomed.

Avlany.
 
#2 ·
Not hard to install, just takes time.

List of stuff:
-Vortech Blower
-Vortech Bracket
-Injectors
-Software
-SC Crank Pulley
-SC Belt
-Oil Feed Line
-Distribution block
-Oil Return line
-Modded Oil Dipstick tube
-CCV One way valve, or just run the crank case back to pre supercharger, post MAF
-Intake for SC
-Filter
-Bypass valve
-Hoses for bypass valve
-Charge pipe with nipple on it for the bypass valve
-Fan spacer if your running a fan

Thats all I can think of off the top of my head.
 
#3 ·
Thank you for reply Bimmerboy.

Here are some pics of my babe:

1.


2.


3.


4.


5.


6.


7.


8.



Once again, your input is greatly apreciated guys. ;)
 
#4 ·
Also would be great if anyone has link on good DIY for this kind of thing.
 
#5 ·
Avlany said:
Also would be great if anyone has link on good DIY for this kind of thing.
There is no really DIY link. There are some directions out there from kits like RMS or Dinan.

And your pictures don't work.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top