BMW Werkz banner

Turn Signal Indicator

862 views 1 reply 2 participants last post by  JAX 
#1 ·
hey guys i was wondering how i would change the turn signal indicator light because im guessing its dead
 
#2 ·
Just take the Instrument cluster out and there is a light bulb in the back that need to be replaced.
The cluster is hold with 2 Torx screws on the upper position.
Watch out when you take it out , there are some connectors in the back with wires ... don't brake them :)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top