04 M3 Rims

[Mr325is]

Hey Everyone,

Does anyone know if these fit on a 92 325?? They are off of a 04 M3, check the pic below..

http://www.nk.rim.or.jp/~elle/bmw/ms...o/SANY0006.jpg

front 18x8 225/45 offset 27mm
rear 18x9 255/40 offset 47mm

I have a feeling they are tooo wide and the offset may cause pre-mature bearing wear...but I would love to know for certain.

I tried searching but anything less than 4 characters is not allowed...errrrr

Thanks everyone!

[97alpineM3]

Sorry about the search problem... ironically enough we are planning on upgrading the board program in the near future... to something that can do a good search also... as for the wheels... yes they will fit... older and newer wheels fit the same... the only thing that would mess things up is the offset... and the rear tires are rather wide... you might have to run a less wide tyre in the rear... I have 265s in the rear with rolled fenders... and they still rub...

Hope that helps ya,

Les

[Cruzin 323is]

ok.. well those are 19"'s.. there is 2 different types... the m3 with those wheels come with 19's.. and the m3 with 18's are pretty much the same wheel, but with a lip... if u really like those rims.. then i would suggest getting some replica's... like me!

[Furious]

youd have to get custom arches to get the rears to fit

[Mr325is]

hmmmm, ya the ones I was looking at were 18's....but I think I will keep the stockers until I can do it right....nutz

Thanks Guys!

Hey Cruzin 323is do you have a site with some pictures??

[dvmotorsports]

I have those exact wheels and no they will not fit even if the fender is rolled.

You can do a few things, get fronts all the way around, put the rears in the fron and the fronts in the rear, serious body work, or sell them.

I prefer serious body work myself. I'm stubborn.

[Shudogg]

so the max with out mod.ing the fenders in the rear is 8"? @ what off set?