Wrecked my 325i Convertable going to part it out

[Majin]

Well I wrecked my 325i in sept and finally decided I am going to part it out. Im thinking of asking $800 for the set of rims and tires17x7(was 1,300new), these were put on 3 days before it was wrecked and have less then 200miles on them. I also have the BMW center logos, these are a direct fit for the E30 except 325iX/M3

[Starmavin]

Where do you live?

[PhatCat]

Would you be able to get some more pics of the wheels/tires please? May be interested in some other goodies as well.

[yammahamma]

what condition is the top in?

[Majin]

I live in Washington, just north of Seattle.

The top of the car is not in very good shape, it has been stitched in a few small places from tears. The plastic window I think was starting to tear too.
replacing the top was one thing I wanted to do to it.

I'll get more pics of the wheels/tires I know the tires are Yokohama's

[photoguy30523]

Originally Posted by Majin

Well I wrecked my 325i in sept and finally decided I am going to part it out. Im thinking of asking $800 for the set of rims and tires17x7(was 1,300new), these were put on 3 days before it was wrecked and have less then 200miles on them. I also have the BMW center logos, these are a direct fit for the E30 except 325iX/M3

how much for the wheels?

[Majin]

[Majin]

Convertable ONLY
I also have a new set of Bavarian Autosport Performance Springs, Bilstein touring shocks(Front&Rear) Bavarian Autosport Shock Installation Kit(Front&Rear) and rear shock mounts that have not been installed on it.
This also has a b&b fabrication tri-flow exhaust with the single oval tip that I used for about a year.

[yammahamma]

How much for the rear shock mounts?

I might be interested in the shocks as well (and possibly some other suspension parts)....

I going to figure out what I need this week end so I can better ask what I'm interested in...

[Starmavin]

I'm interested in your ABS wheel sensors.

[e30dream]

hows the front bumper?


ok in all honesty... how much for the bavauto springs?

and any pics of the rear.. the back bumper might be of interest to me. thanks

[PhatCat]

Are those wheels the same offset as for a 325e? Do you know the brand and weight?

[Majin]

front and rear bumper are fine, had a fiberglass kit on it when it was wrecked so the original have been sitting in my garage.

17X7 25MM Offset Bolt Pattern: 4X100 Center Bore: 57.1MM I got the rims from ebay and not sure of the weight

Where are the ABS wheel sensors?

I'm not sure what to ask for prices

[PhatCat]

Originally Posted by Majin

17X7 25MM Offset Bolt Pattern: 4X100 Center Bore: 57.1MM I got the rims from ebay and not sure of the weight

They look great on there! I bet they would look pretty damn good on mine as well. 215's?

[Majin]

205/45zr17 88w