What Aftermarket CD player do you have??

[seth112]

Just curious what everyones using..I need to replace my factory deck

[Aether]

Pioneer DEH P3600.

- 50x4 watts peak, 22x4 watts continuous
- 94dB signal/noise
- 2 Audio line-out RCA phono x 2 Installed, 1 IP-Bus
- 3-band parametric equalizer
- 50 Hz, 80 Hz, and 125 Hz high-/low-pass frequencies

Sounded better than both of the Alpine units I wanted.
It'll sound even better once my sub is on an amp.

[TMac325is]

Alpine Mp3/CD Player
great sound/quality/looks/features, alpines the way to go

[The Machine]

Pioneer Deh-P5500MP Cd/MP3 player

Pioneer owns all.

[spieluhr]

Eclipse CD3414. cd/mp3

alpine is also a good way to go. but a little more dough sometimes and i like the look of the cheaper eclipse HU's more sometimes

[1980 BMW 323is]

Alpine Cd/ Mp3 Player CDM 9807:
Zapco 360W 4 channel amp
2 Zapco 500W Mono Amps
2 12' JL Audio W3 Subs
Alpine Type R 6x9's
Alpine Type R 4x6's

[spiff325is]

Hey guys, I got a nice Kenwood one that was like 250$. I dont know the model, cuz I got it for christmas, but it does like 27 x 4 continuous. BUt its like, I know the reciver(head unit) is good, and I got some new speakers in, but I cant go that loud without the speakers popping and stuff. and my friends(who are more into car stereos then I) say that I need a new amp, and that even just a new 200 watt amp would help a lot and make it sound really clearn and get some more oompf. what small amp would you guys recommend for speakers, not a sub.

[1980 BMW 323is]

I'd recommend a Sony Xplod 600w 4 channel amp. They dont cost too much, and they make ur speakers sound real good. I'm running a whole system with 2 12inch subs too it and it still pounds good

[spieluhr]

JBL BP80.4

Output 4 Ohms: 40W x 4

Output 2 Ohms: 80W x 4

Output 4 Ohms Bridged: 160W x 2

Signal-to-Noise (dBA): >110

Frequency Response (±3dB): 10Hz - 50kHz

Total Harmonic Distortion: 0.05%

Input Sensitivity: 250mV - 4V


available here...

http://www.woofersetc.com/product.asp?0=310&1=311&3=102

[spiff325is]

so that JBL amp you would recommend to run on 4 speakers?

[The Machine]

If I were you I would go with something a little more powerful than that JBL. However it all depends on what your speakers are. What kind of speakers are they, and how many RMS watts are they rated at?

[spiff325is]

2 jbl's in those square boxes behind the rear bench, you know, the little shelf by the rear seats under the windsheild. and I have two bloupunk speakers inteh doors up front, all rated to take 100watts.

[The Machine]

You can get great deals on Ebay. Search for a 4 channel amp on ebay.

I'm not sure how much you are willing to spend, but if I were your, I would get something like this. Rockford Fosgate amp

[tyro2001]

Pioneer DEH-16

50 watts x 4
Electronic volume control
3-band parametric equalizer
Selectable loudness control (low/mid/high/off); selectable fader
RCA pre-outs, 1 pair
Purple Liquid Crystal Display with LED backlight
Clock
Pause/repeat/random play
24-station/6-button presets
Audible fast-forward/reverse
Compatible with CD-R and CD-RW formats
8x over-sampling
3-beam laser pickup
Anti-shock mechanism
Detachable faceplate

[545ismg]

any pics