Replacing an '87 325 clutch - BMW Forum

SunBeamer87 · 03-05-2008, 12:18 AM

Have the terrible fact of the dual-mass flywheel needing to be turned but can hardly find anyone to turn it.

Was wondering, will the clutch and flywheel work from a 92-95 model?

german-speed-demon · 03-05-2008, 10:23 AM

I don't think so. You are trying to take a clutch pack from an e36 and install it in an e30. Best thing to do is try to find another somewhere else or buy new.

gotKRAUT · 03-05-2008, 03:15 PM

you can no turn a BMW flywheel, they have a hardened surface, once that wears through you huck them, get a new one or swap to the single mass with sprung clutch setup...

88 and up 325i and 325iS got the single mass flywheel and sprung clutch

german-speed-demon · 03-05-2008, 03:40 PM

yes listen to the pirate man above me. he knows his shit when it come to e30's...

AlpineSixAndSeven · 03-05-2008, 05:20 PM

Quote:

Originally Posted by gotKRAUT

you can no turn a BMW flywheel, they have a hardened surface, once that wears through you huck them, get a new one or swap to the single mass with sprung clutch setup...

88 and up 325i and 325iS got the single mass flywheel and sprung clutch

Did the on my es it reved much better and quicker... seemed like a small gain... you might as well do it while you in there....