rear badge

[blazein]

well my son and I have spent the day spot filling,sanding, fixing two rust spots, and in general getting ready for our custom paint job. The rear emblem really needs replaced its not going to be up to par. Is it held on with glue or do you have to stand on your head, tie your shoes just right, and pray to unbolt it. Im stumped. I know this is a silly question, but I dont want to create body work when doing it. Thanks for your help Dad and son !

[marti5]

If your talking about the BMW, its got two round pins on the rear,with one each side in the middle of the badge horizontal, just get a soft cloth with a flat head screw driver and gently prise one side at a time bit by bit and it will pull out of its two holes in the trunk lid, new one just push on.

[AlpineSixAndSeven]

Really depends on the car FIRST what Year and model is the car... BTW most use Double sided taped to hold it on..... older Cars had pins and the doublesided tape..

[blazein]

1987 325is its gotta be pins there just is no way to bolt it on thanks