made decision on 2.7. need more details. - Page 2 - BMW Forum

harryinsaudi · 07-01-2009, 04:06 AM

hey sled, was i married to you once?

german-speed-demon · 07-01-2009, 11:04 AM

easy guys. thats an order. push it and get a 7 day.

that being said, yes you can do it. there are many different ways to do it. but what it boils down to is you wind up with a stroker. very nice motor, with the proper setup.

vaughn, you have a good resource, also check e30tech, some goodies there as well.

everyone else just chill, ///Mkay?

rvaughnp · 07-01-2009, 11:42 AM

Thanks, I will.

harryinsaudi · 07-01-2009, 12:46 PM

i'm cool, let me know if you need that article.

rvaughnp · 09-22-2009, 09:37 PM

harry just sent message to you, Thanks.

Here is a link linking up the post for the seperate piston manufactures information. It is still a work in progress but should be wrapping up shortly.
http://www.bimmerwerkz.com/forum/3-s...5-a-67052.html
I will be doing the 2.7 crank(81mm)/ 2.5 rod(135mm) and a custom piston. I have spoken with a few people, they have been a big help and will be mentioned in my final write up, that have done this build or similar (NA). In addition, manufactures that have done this configuration for their own build motors and custom pistons for this same build to direct customers (like me shortly).

Trying to keep everything together, sorry for highjacking.

rvaughnp