brakes!!!!!!!

[hk30]

i having probs with my brakes...like a bad master cylinder..but ive been checking and i filled my fluid to the top and started it and pumped the brakes,checked again and the level dropped?????? but i found no leaks....im confused

[witeshark]

If there are no leaks, the brake system probably has air in it and needs bleeding. You may need a kit or some help to do it right.

[hk30]

jus bled my brakes...and got good fluid from all exept the front pass ..hardly ne????....brakes real bad now!!!!!!

[johnnybayonne]

Originally Posted by hk30

jus bled my brakes...and got good fluid from all exept the front pass ..hardly ne????....brakes real bad now!!!!!!

Did you see my post response to your other brake thread........

Originally Posted by hk30
about 2 months ago my brakes got real spongy.....so i replaced the fronts it no help....backs seem fine...petel goes to the floor???? it hardly stops ....i got brake fluid .....need help im confused

Your brake master cylinder is bad, it has an internal leak.......this is when the brake fluid leaks past the the piston because of faulty seals.....so when you press the brake pedal the fluid is not compressed & pushed out to each brake caliper, it just flushes back into the reservoir, thus the brake pedal going to the floor.

johnny,

http://www.bimmerwerkz.com/forum/3-s...rob-59817.html


Your Parts Search Returned 2 Part(s)

[solanog]

Check if it leaks on the inside, up the pedal were it pushes the cylinder.