2nd Gear Member
Join Date: Dec 2007
Location: Germany (for a while now!!!)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I'm wondering if anyone has had this problem before and what they wound up doing to fix it. After I did my pads and SS lines I went to bleed my brakes and ran into no fluid coming out of the right rear caliper. I followed on to the other calipers and they bled fine but went again to repeat the process and the right rear would stay solid and not release pressure or fluid. I removed the caliper and checked it and all checked good so i'm a bit confused now.
Any advice would be great. thanks in advance.