Hi All.. iam at other bimmer forums with my build thread.
so why not here to !
A bit of info on the car then for those that havent had the time to see the green "hulk" before.
The car then.
BMW E30 2door
plastic hood and trunk, and plastic windows in the back.
M20b25 Drill ø stroked to 2.7L
The head is an standard 2.5 with crmo retainers, stainless steel valves, and heavyduty rockers
and PPF camshaft
Its making 646whp and 832wnm at the moment
With this power it made 9,6 and 235kmh at the 1/4 mile
And this is with split rear end and a zf gearbox
Now the target for 2011
The powertrain will remain the same, the clutch setup will be changed if necessary.
The goal is to hit the 8sec on the 1/4mile, to this then will need more than 646wheel horses.
These components will be changed
Fuel system, Turbo, cam, injectors and then new pistons
the fuel system for this year will be completely from Weldon racing pump who is also a new sponsor for 2011
Filters also from Weldon.
And for the daily driver setup will need an Weldon Fuel pump controller
(this will make the fuel much colder and also so the pump wont run att 100% all the time)
injectors will be bosch 1600cc
Turbo and cam is not clear yet, but its between a PT71 or BorgWarner 375 or 475
More to come
Its standing still in the garage.. still waiting for some parts. such as Pistons and The turbo.
Here are some pics of the car.
and some parts.
Waiting for new parts
This is an mess.. but soon there will be complete weldon stuff
Needs a bit cleaning up in here i think
Finally got the stuff from weldon.. and others
Have been talking to ross pistons.. and got an super good deal from them.. Spoke to CP as well but they havent had the time to offer me anything.. so Looks like im be running ross pistons.. feels good.. they have been working good for 3 years.
Still some small updates.
The Turbo has arrived..
and some stuff for the exhaust and the intake.
New sponsor is CatCams Uk
they will supply me with an custom cam.
The Manifold has arrived..
a good friend of mine took his time to make this.
starting to feel the heat.. so i went to the garage and installed the old engine.
This one is gonna work as a dummy for the intake,turbo pipes and downpipe fabrication
Iv got some more speed parts in the mailbox.
This time i got.
The custom made camshaft that Catcams made, with matching valve springs and retainers
PPF here i sweden got me an good price on oversize valves and runners for the intake im gonna build
CUSTOM CUSTOM !!