BMW Forum - BimmerWerkz.com

BMW Forum - BimmerWerkz.com (http://www.bimmerwerkz.com/forum/)
-   3-Series (E21, E30) (http://www.bimmerwerkz.com/forum/3-series-e21-e30/)
-   -   Bmw E30 - 8sek hunt - Daily driver (http://www.bimmerwerkz.com/forum/3-series-e21-e30/bmw-e30-8sek-hunt-daily-driver-73386.html)

karel 04-24-2011 09:23 AM

Bmw E30 - 8sek hunt - Daily driver
 
Hi All.. iam at other bimmer forums with my build thread.

so why not here to !



A bit of info on the car then for those that havent had the time to see the green "hulk" before.

The car then.

BMW E30 2door
plastic hood and trunk, and plastic windows in the back.

Engine.
M20b25 Drill ø stroked to 2.7L
Ross Pistons
Custom rods
The head is an standard 2.5 with crmo retainers, stainless steel valves, and heavyduty rockers
and PPF camshaft

Its making 646whp and 832wnm at the moment
With this power it made 9,6 and 235kmh at the 1/4 mile

And this is with split rear end and a zf gearbox

Now the target for 2011
The powertrain will remain the same, the clutch setup will be changed if necessary.

The goal is to hit the 8sec on the 1/4mile, to this then will need more than 646wheel horses.

http://www.bimmerboost.com/images/im...11/01/1361.jpg

http://www.bimmerboost.com/images/im...11/01/1362.jpg

http://www.bimmerboost.com/images/im...11/01/1363.jpg

http://www.bimmerboost.com/images/im...11/01/1364.jpg

These components will be changed

Fuel system, Turbo, cam, injectors and then new pistons

the fuel system for this year will be completely from Weldon racing pump who is also a new sponsor for 2011
http://www.bimmerboost.com/images/im...11/01/1365.jpg

fuel system
Weldon 2345
http://www.bimmerboost.com/images/im...11/01/1366.jpg

Regulator
Weldon 2047
http://www.bimmerboost.com/images/im...11/01/1367.jpg

Filters also from Weldon.
http://www.bimmerboost.com/images/im...11/01/1368.jpg

And for the daily driver setup will need an Weldon Fuel pump controller
(this will make the fuel much colder and also so the pump wont run att 100% all the time)
http://www.bimmerboost.com/images/im...11/01/1369.jpg

injectors will be bosch 1600cc
Turbo and cam is not clear yet, but its between a PT71 or BorgWarner 375 or 475


More to come:)

/ Karel


Its standing still in the garage.. still waiting for some parts. such as Pistons and The turbo.

Here are some pics of the car.

and some parts.

Waiting for new parts :)
http://karel.dyndns-server.com/bilde...0110219-01.JPG

This is an mess.. but soon there will be complete weldon stuff
http://karel.dyndns-server.com/bilde...0110219-02.JPG

Needs a bit cleaning up in here i think
http://karel.dyndns-server.com/bilde...0110219-03.JPG


http://karel.dyndns-server.com/bilde...0110219-04.JPG


http://karel.dyndns-server.com/bilde...0110219-05.JPG


http://karel.dyndns-server.com/bilde...0110219-06.JPG

Finally got the stuff from weldon.. and others
http://karel.dyndns-server.com/bilde...0110219-07.JPG


Have been talking to ross pistons.. and got an super good deal from them.. Spoke to CP as well but they havent had the time to offer me anything.. so Looks like im be running ross pistons.. feels good.. they have been working good for 3 years.

Still some small updates.

The Turbo has arrived..

and some stuff for the exhaust and the intake.

http://karel.dyndns-server.com/bilde...0110227-01.JPG

http://karel.dyndns-server.com/bilde...0110227-02.JPG

http://karel.dyndns-server.com/bilde...0110227-03.JPG

New sponsor is CatCams Uk

they will supply me with an custom cam.

The Manifold has arrived..

a good friend of mine took his time to make this.

http://karel.dyndns-server.com/bilde...0110313-01.JPG

http://karel.dyndns-server.com/bilde...0110313-02.JPG

http://karel.dyndns-server.com/bilde...0110313-03.JPG

http://karel.dyndns-server.com/bilde...0110313-04.JPG

starting to feel the heat.. so i went to the garage and installed the old engine.

This one is gonna work as a dummy for the intake,turbo pipes and downpipe fabrication

http://karel.dyndns-server.com/bilde...0110314-01.JPG

http://karel.dyndns-server.com/bilde...0110314-02.JPG

http://karel.dyndns-server.com/bilde...0110314-03.JPG

http://karel.dyndns-server.com/bilde...0110314-04.JPG

http://karel.dyndns-server.com/bilde...0110314-05.JPG

http://karel.dyndns-server.com/bilde...0110314-06.JPG

http://karel.dyndns-server.com/bilde...0110314-07.JPG


Iv got some more speed parts in the mailbox.

This time i got.

The custom made camshaft that Catcams made, with matching valve springs and retainers

PPF here i sweden got me an good price on oversize valves and runners for the intake im gonna build

http://karel.dyndns-server.com/bilde...0110326-01.JPG

CUSTOM CUSTOM !! :D
http://karel.dyndns-server.com/bilde...0110326-02.JPG


http://karel.dyndns-server.com/bilde...0110326-03.JPG

http://karel.dyndns-server.com/bilde...0110326-04.JPG

karel 04-24-2011 09:27 AM

an small update..

the build is in full speed..

the complete rolecage will be done tomorow.. started yesterday..

then the intake and some more stuff..

willl update with an complete report after the weekend.

http://karel.dyndns-server.com/bilde...la/sala-01.JPG

http://karel.dyndns-server.com/bilde...la/sala-02.JPG

http://karel.dyndns-server.com/bilde...la/sala-03.JPG

http://karel.dyndns-server.com/bilde...la/sala-05.JPG

http://karel.dyndns-server.com/bilde...la/sala-06.JPG

http://karel.dyndns-server.com/bilde...la/sala-07.JPG

update.

The Role Cage is finised

ska göra lite förstärkningar mot bakvagnen bara.

http://karel.dyndns-server.com/bilde...2/sala2-01.JPG

http://karel.dyndns-server.com/bilde...2/sala2-02.JPG

http://karel.dyndns-server.com/bilde...2/sala2-03.JPG

http://karel.dyndns-server.com/bilde...2/sala2-04.JPG


Got the 66mm WG from precision.. BIG AS HELL !!
http://karel.dyndns-server.com/bilde...2/sala2-05.JPG

http://karel.dyndns-server.com/bilde...2/sala2-06.JPG

http://karel.dyndns-server.com/bilde...2/sala2-07.JPG

http://karel.dyndns-server.com/bilde...2/sala2-08.JPG

http://karel.dyndns-server.com/bilde...2/sala2-09.JPG

Johnny who is helping me out with this work.. and thx to his father that lets us borrow the workshop
http://karel.dyndns-server.com/bilde...2/sala2-10.JPG

http://karel.dyndns-server.com/bilde...2/sala2-11.JPG

http://karel.dyndns-server.com/bilde...2/sala2-12.JPG

http://karel.dyndns-server.com/bilde...2/sala2-13.JPG

The Role cage is finished and the Intake is taking shape.

http://karel.dyndns-server.com/bilde...a3/sala-01.JPG

http://karel.dyndns-server.com/bilde...a3/sala-02.JPG

http://karel.dyndns-server.com/bilde...a3/sala-03.JPG

http://karel.dyndns-server.com/bilde...a3/sala-04.JPG

http://karel.dyndns-server.com/bilde...a3/sala-05.JPG

http://karel.dyndns-server.com/bilde...a3/sala-06.JPG

http://karel.dyndns-server.com/bilde...a3/sala-07.JPG

http://karel.dyndns-server.com/bilde...a3/sala-08.JPG

http://karel.dyndns-server.com/bilde...a3/sala-09.JPG


Got these new custom made pistons from ross.. super fast delivery and handling !!
http://karel.dyndns-server.com/bilde...a3/sala-10.JPG

witeshark 04-24-2011 09:44 AM

That's one hell of a car :welcome

brettski 04-24-2011 06:40 PM

Welcome to the Werkz. That's one hell of a high powered daily driver. Keep the updates coming.

karel 04-26-2011 12:33 AM

Thx Guys :)


more updates will come this week.

/k

karel 04-28-2011 05:41 PM

Now there is SPEED !!

Yesterday we spent 4 hours on mounting the injector sockets THAT SUCKED !!!!

But today we had more speed

I went by My motorguy to help him out, i changed the bushings in the rods to a much harder and better ones.
http://karel.dyndns-server.com/bilde...4/sala4-01.JPG


http://karel.dyndns-server.com/bilde...a4/sala4-02JPG

http://karel.dyndns-server.com/bilde...4/sala4-03.JPG

We made an rigg for the injector sockets
http://karel.dyndns-server.com/bilde...4/sala4-04.JPG

Johnny keept on welding up the intake
http://karel.dyndns-server.com/bilde...4/sala4-05.JPG

http://karel.dyndns-server.com/bilde...4/sala4-06.JPG

Johnny then moved on to the turbo pipes, dident say a thing during the evening and the it was finished
http://karel.dyndns-server.com/bilde...4/sala4-07.JPG


http://karel.dyndns-server.com/bilde...4/sala4-08.JPG

I did start with the wg pipes
http://karel.dyndns-server.com/bilde...4/sala4-09.JPG

http://karel.dyndns-server.com/bilde...4/sala4-10.JPG

http://karel.dyndns-server.com/bilde...4/sala4-11.JPG

one of the pipes to the wg
http://karel.dyndns-server.com/bilde...4/sala4-12.JPG

Then i did the downpipe
http://karel.dyndns-server.com/bilde...4/sala4-13.JPG

johnny finished up the turbo pipes
http://karel.dyndns-server.com/bilde...4/sala4-14.JPG


http://karel.dyndns-server.com/bilde...4/sala4-15.JPG

when Johnny was finished with the turbo pipes we took some time to admire it
http://karel.dyndns-server.com/bilde...4/sala4-16.JPG

2 happy guys
http://karel.dyndns-server.com/bilde...4/sala4-17.JPG

http://karel.dyndns-server.com/bilde...4/sala4-18.JPG

http://karel.dyndns-server.com/bilde...4/sala4-19.JPG

http://karel.dyndns-server.com/bilde...4/sala4-20.JPG

http://karel.dyndns-server.com/bilde...4/sala4-21.JPG

http://karel.dyndns-server.com/bilde...4/sala4-22.JPG

MORE TO COME

witeshark 04-28-2011 08:29 PM

Wow!

Bimmercivillian 04-29-2011 10:44 AM

never thought id see a bmw rally car

karel 04-29-2011 02:52 PM

Quote:

Originally Posted by Bimmercivillian (Post 636301)
never thought id see a bmw rally car


???

karel 05-17-2011 01:57 PM

update Time.

Its been quite for som time.. and that have sucked..

All of the stand still has been due to the motor guy has to much to handle on 1 person.
But now it seems that the speed is upp again.

The new bearing is sanded
http://karel.dyndns-server.com/bilde...r/motor-02.JPG

http://karel.dyndns-server.com/bilde...r/motor-03.JPG

the engine block is flattened
http://karel.dyndns-server.com/bilde...r/motor-04.JPG


http://karel.dyndns-server.com/bilde...r/motor-05.JPG

Drilling the engine block
http://karel.dyndns-server.com/bilde...r/motor-06.JPG


http://karel.dyndns-server.com/bilde...r/motor-07.JPG

http://karel.dyndns-server.com/bilde...r/motor-08.JPG

Milling for the steal thread
http://karel.dyndns-server.com/bilde...r/motor-09.JPG


http://karel.dyndns-server.com/bilde...r/motor-10.JPG

Hening the last of the block
http://karel.dyndns-server.com/bilde...r/motor-11.JPG


http://karel.dyndns-server.com/bilde...r/motor-12.JPG

http://karel.dyndns-server.com/bilde...r/motor-13.JPG

When the head got welded it got a bit twisted
http://karel.dyndns-server.com/bilde...r/motor-14.JPG

http://karel.dyndns-server.com/bilde...r/motor-15.JPG

http://karel.dyndns-server.com/bilde...r/motor-16.JPG

A friend of mine wanted to try a new foil he got home.. so i voluntared :)
http://karel.dyndns-server.com/bilde...r/motor-17.JPG


http://karel.dyndns-server.com/bilde...r/motor-18.JPG

http://karel.dyndns-server.com/bilde...r/motor-19.JPG

http://karel.dyndns-server.com/bilde...r/motor-20.JPG

Jocke started to lay down the foil
http://karel.dyndns-server.com/bilde...r/motor-21.JPG

A bunch of friends got over to se the final product
http://karel.dyndns-server.com/bilde...r/motor-22.JPG

http://karel.dyndns-server.com/bilde...r/motor-23.JPG

http://karel.dyndns-server.com/bilde...r/motor-24.JPG

http://karel.dyndns-server.com/bilde...r/motor-25.JPG

http://karel.dyndns-server.com/bilde...r/motor-26.JPG

http://karel.dyndns-server.com/bilde...r/motor-27.JPG

http://karel.dyndns-server.com/bilde...r/motor-28.JPG

http://karel.dyndns-server.com/bilde...r/motor-29.JPG


Hopefully im putting togheter the engine block tomorow and this weekend its going in.

karel 05-20-2011 03:39 PM

New day new update

Started by putting the bottom end togheter at Engson the motor guy
http://karel.dyndns-server.com/bilde.../motor2-00.JPG
http://karel.dyndns-server.com/bilde.../motor2-01.JPG
http://karel.dyndns-server.com/bilde.../motor2-02.JPG
Grindning the piston ring gap must be the most boring thing one can do !!
http://karel.dyndns-server.com/bilde.../motor2-03.JPG

Take alot of time aswell :(
http://karel.dyndns-server.com/bilde.../motor2-04.JPG
http://karel.dyndns-server.com/bilde.../motor2-05.JPG
http://karel.dyndns-server.com/bilde.../motor2-06.JPG
Johnny send me som pictures of the intake.. its finished now and i will be getting it tomorow


http://karel.dyndns-server.com/bilde.../motor2-07.JPG
http://karel.dyndns-server.com/bilde.../motor2-08.JPG
http://karel.dyndns-server.com/bilde.../motor2-09.JPG
http://karel.dyndns-server.com/bilde.../motor2-10.JPG
http://karel.dyndns-server.com/bilde.../motor2-11.JPG
http://karel.dyndns-server.com/bilde.../motor2-12.JPG
http://karel.dyndns-server.com/bilde.../motor2-13.JPG
Billy is making the hoses for the fuel system will be getting that tomorow aswell
http://karel.dyndns-server.com/bilde.../motor2-14.JPG

witeshark 05-20-2011 03:54 PM

Looks like fun!

westin 05-20-2011 05:43 PM

man thats some serious build

jimmythepie 05-21-2011 01:29 PM

great post, love the colour,in fact i love it all im jealous.

karel 05-31-2011 03:40 PM

The Head is almost done, ready to be installed

Stefan at engson motor made the track for the steel ring to be seated.
http://karel.dyndns-server.com/bilde.../engson-00.JPG

The head is leveled at both sides
http://karel.dyndns-server.com/bilde.../engson-01.JPG


http://karel.dyndns-server.com/bilde.../engson-02.JPG


http://karel.dyndns-server.com/bilde.../engson-03.JPG

http://karel.dyndns-server.com/bilde.../engson-04.JPG

1mm oversize valves from PPF
http://karel.dyndns-server.com/bilde.../engson-05.JPG

2 friends of mine came over and helped out with the wg piping
http://karel.dyndns-server.com/bilde.../engson-06.JPG

starting to look good
http://karel.dyndns-server.com/bilde.../engson-07.JPG

i welded up the dp with my friends TIG
http://karel.dyndns-server.com/bilde.../engson-08.JPG

http://karel.dyndns-server.com/bilde.../engson-09.JPG

http://karel.dyndns-server.com/bilde.../engson-10.JPG

http://karel.dyndns-server.com/bilde.../engson-11.JPG

Helgen då va jag på kjula o hjälpte grabbarna att skruva.. fernis kardan experten.. spelar ingen roll
att stödlagret är borta man kör ändå :D
http://karel.dyndns-server.com/bilde.../engson-12.JPG

Blocket är så gott som klart. allt är moment draget och på plats.. små grejer kvar.
http://karel.dyndns-server.com/bilde.../engson-13.JPG

http://karel.dyndns-server.com/bilde.../engson-14.JPG

waiting for the head !
http://karel.dyndns-server.com/bilde.../engson-15.JPG

http://karel.dyndns-server.com/bilde.../engson-16.JPG

http://karel.dyndns-server.com/bilde.../engson-17.JPG

if it goes to plan the car should be ready for startup this weekend.


All times are GMT -5. The time now is 10:15 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome