BMW 635i help

[g3cko12]

I have a question which i have yet to find help with.
First of all i replaced a starter and flywheel in my 1985 BMW 635i because it was grinding away. Next i did some basic maintenance including ignition coil because it wasn't starting up. Ran well for a while and recently since its been cold it has intermittently been not starting up. I have been looking at it over and over, to remember that there are 2 wires (brown & green) which are not connected to anything, but remember taking them off of the starter. Now i have forgotten where they go. I thought maybe i was wrong and they went to the Cold Start Valve, except when looking at the cold start valve it is plugged in. Any help would be Greatly appreciated!!!!

[witeshark]

Have you looked at realoem.com?

[g3cko12]

Is not that a part site? I have no clue what part we need...

[witeshark]

There are a lot of diagrams.

[g3cko12]

Wow, that is a great site. Although they did not have the diagram with those two wires. Bummer!

[AlpineSixAndSeven]

can you snap a picture of the wire?

[g3cko12]

Finally got some pictures of the two wires im looking at. Let me know if anyone can help me. Thanks!

[g3cko12]

Alright so I went through everything and noticed that once again it has no spark. Not even from the Coil which I already replaced. Any way to tell if all the sensors are working properly?

[marti5]

Diagnostics, but I would say its your crankshaft sensor as the camshaft sensor mainly takes care of the injectors.